Bespoke Dining Tables — Made to Your Measurements
Tell us the size and we’ll make it. Every table is built by hand in our Derbyshire workshop — a solid timber top cut to your measurements, on the legs you choose, with a matching bench if you want one.
Type your own length and width below — we cut to the centimetre. Pick the timber, the colour and the legs, and the price updates as you go. Order it there and then.
The same tables we make for restaurants, bars and offices across the UK — made to your measurements, delivered to your door.
Where our tables are
From kitchens and dining rooms to bars, restaurants and offices. Through Foundry Studio we make and fit tables for commercial spaces across the UK — and every one of them is built in the same workshop in Derbyshire as yours will be.
Reads light in a smaller kitchen; the bench tucks fully under
The leg most of our restaurant customers choose
One centre pedestal, legroom all round
How they’re made
Tops are glued up from equal-width solid boards — 45mm redwood pine, 45mm oak or 45mm American black walnut — sanded, given a soft chamfer on the edge, then stained and finished with hardwax oil so they wipe clean and can be refinished years from now. Legs bolt to a steel plate let into the underside of the top, so the table comes apart for moving and goes back together with an Allen key.
Don’t need bespoke?
If one of our standard sizes fits, it will cost you a little less — bespoke is cut and set up individually. Have a look at our dining tables first; if the size you want isn’t there, come back here.
Questions
How long does it take?
Around four weeks for pine, six for oak and walnut. Custom RAL leg colours add about a week for the powder coater.
How does it arrive?
Top and legs separately, well wrapped, with the bolts and the key. Tables over 240cm come on a pallet, kerbside, and we ring to arrange a day.
What about the bench?
Same top, same legs (the spider base is table-only, so its benches come on the matching steel X-frame), 35cm wide and 45cm high. We set the length 40cm shorter than the table so it slides underneath, but you can change it.
Can I have a size bigger than the calculator allows?
Yes — up to about 4 metres as a single top in pine. Over 300cm (295cm in oak and walnut) it needs a quote for the build and delivery, so use the form below.
Can I match a colour I already have?
For steel legs, give us a RAL number and we’ll have them powder coated to it. For the top, pick the nearest of our three stains or send us a photo of what you’re matching and we’ll advise.
Ask us anything
Bigger than 3 metres, a round or oval top, a leg you’ve seen somewhere else, or you’d just rather talk it through — tell us what you’re after and we’ll come back to you, usually the same working day.